Genset Telematicsby S5 System

Standby generation

A tested genset can still fail the first real outage

Genset Telematics records the things a weekly no-load start never exercises: starter-battery cranking, fuel condition, coolant and jacket temperature under load, run hours and fault codes. The record turns a test result into a reliability trend.

RecordsEvery startCranking included
ShowsMargin at loadNot just pass or fail
One trend
Per generator
Data centresHospitalsRemote sitesStandby plant

The test is the least demanding duty the machine sees

A standby diesel generator spends most of its life doing nothing, and the tests that prove it works are the easiest thing it will ever do. A weekly no-load start spins the engine and lights the panel, but it does not load the alternator, does not draw on the starter battery the way a cold loaded start does, and does not test the fuel and cooling systems under sustained load. The gap between a passed test and a carried site is where standby failures live.

What happens today

A run sheet records that the set started and ran for thirty minutes. The battery is changed on a calendar, the fuel is checked by eye, and the first real load the machine sees may be the outage it was bought for.

What Genset Telematics records instead

Telemetry turns the occasional test into a continuous record, so a starter battery that is losing cranking capacity and a cooling system that is losing margin both show as trends well before either is tested by demand.

What the kit is

Sensing on the set, a telemetry node, and one record per generator that the maintenance planner reads instead of a run sheet.

Start and cranking

Starter-battery voltage and cranking behaviour are recorded on every start, which is the earliest reliable signal that a battery will not carry a cold loaded start.

Load and temperature

Coolant and jacket temperature alongside load mean a cooling system that is losing margin is visible during a test instead of during an outage.

Fuel and faults

Fuel level and condition, run hours and controller fault codes are kept together, so a fault code can be read against the duty the set was doing when it appeared.

How a site runs it

  1. Fit the telemetry node and take the controller's fault and run-hour data from its own port rather than adding a second set of sensors.
  2. Record the first loaded test as the baseline, because a no-load start alone cannot show cooling or fuel margin.
  3. Set the alarm on cranking voltage and on temperature rise at load, which are the two trends that precede the classic failure.
  4. Put the monthly record in front of the person who signs the maintenance schedule, not only in front of the electrician.
  5. Keep the fuel-quality trend with the run hours, because contaminated fuel and low hours together are a common cause of a set that starts and then stops under load.

What ships with an order

Genset Telematics ships as a telemetry node per generator with the sensor set needed for start, load, temperature and fuel, plus the record store and alarm path into the site's maintenance process.

Evidence

The sample record shows the pattern that matters: every weekly test passes while cranking voltage declines and the temperature rise at load grows. The record is illustrative and is not a capture from a customer's site.

Genset Telematics recordSample · not a real batch

Genset record — sample, not a real set CRANKING 9.4 V

Product
Genset Telematics
Set
Standby 500 kVA, Building B
Weekly test
Passed, 30 minutes no load
Cranking voltage
11.8 V to 9.4 V over 14 weeks
Coolant rise at load
Plus 6 degrees against baseline
Run hours
214 h total, 3 h under load
Recorded
2026-10-30T08:02+08:00

Sample record. Values are illustrative and are not customer data.

Why this is not a commodity sensor

The moat is the loaded-test history per set. Reliability of standby plant cannot be quoted from pass or fail, only from how much margin the set had the last time it was actually asked to work.

What this is not

Genset Telematics reports on the generator it is fitted to and cannot report on a set that has been isolated from it. It does not perform a load test and does not replace the periodic loaded test recommended for standby plant; it makes the results of that test and of every start visible in one place. A set with no load-bank test history is reported as having none. The kit is built to order, and supply timing is confirmed in the written quotation.

Claim ceiling — C0, monitoring and records

Genset Telematics measures and reports what its sensors see. That is monitoring, not a compliance or safety certification: the log is evidence of what the equipment recorded, and nothing on this page, in the quotation or on the invoice certifies your site, your process or your equipment against any standard.

Price and quotation

One product page S5 owns. The first 3 years of service are included in the up-front project price; from year 4 the subscription is A$10 per site / month. The hardware and the scope are quoted against a site assessment, and the quotation carries that figure. Nothing is sold directly from this page: the listed price is recorded through a written quotation, and the quotation states the lead time, the freight and the payment terms for your site.

PieceWhat happensStatus
QuotationA written quotation is issued for this page and the configuration shownIssued on request
Buy nowOpens the quotation page: the listed price is recorded against a written quotation, no order, no paymentA$10 held
Lead time and freightStated in the written quotation for your siteConfirmed in the quotation
Commercial quoteA quotation reference is issued for this page and configurationInstant, same page
Subscription, from year 4The first 3 years are inside the quoted priceNot charged today

Get instant commercial quote

One email address and your configuration, and the quotation for this Genset Telematics build is issued against this page. No account, no sales call required.

The quotation states the figure for the hardware and the scope described on this page. The first 3 years of service are included in the up-front project price; from year 4 the subscription is A$10 per site / month. Delivery, invoicing and payment terms are stated in the quotation.

Frequently asked questions

Direct answers to the questions buyers, installers and AI search tools ask about Genset Telematics.

Why does a weekly no-load test not prove a generator will work?

A no-load start proves the engine turns, the controller sequences and the alternator produces voltage. It does not load the alternator, does not ask the starter battery for the current a cold loaded start demands, and does not heat the coolant system to the point where a blocked core or a failing pump shows. A set can pass every weekly test for a year and still fail on the first real outage.

What does Genset Telematics measure?

It records starter-battery voltage and cranking behaviour on every start, coolant and jacket temperature against load, fuel level and condition, run hours and the controller's own fault codes. Those values are kept as one record per set, so a fault code can be read against the duty the machine was performing when it appeared.

Does this replace the periodic loaded test?

No. A load bank still exercises the set at the load the site actually needs, and nothing on this page substitutes for that. What telemetry changes is that the result of each loaded test is kept beside every start, so the site can see whether margin is holding or eroding between tests instead of comparing two numbers years apart.

How does it read data from the generator controller?

The node takes fault and run-hour data from the controller's own communications port where the controller exposes one, and measures the electrical and thermal values with its own sensors. That combination avoids adding a second set of temperature probes to a machine that already has them, while keeping the measurements the controller does not report.

What alarm points should a site set?

The two that earn their place are cranking voltage on every start and temperature rise at load against the site baseline. Cranking voltage falling across weeks is the earliest reliable sign that a battery will not carry a cold loaded start, and a growing temperature rise points at cooling capacity. Both are trends, so the alarm needs a baseline from a loaded test to mean anything.

What happens if the telemetry node loses power or network?

The gap is recorded and reported as missing data for that period, not as a healthy set. The node holds readings locally and uploads them when power and network return, so a short outage does not lose the start record. A set that has been isolated deliberately is marked as isolated rather than left looking idle.

How is Genset Telematics priced, and what is charged today?

It is quoted per generator, because sensor count and controller access vary between sets, and a multi-set site is quoted as a group. The quotation states the node and sensor set, the first 3 years of the subscription and any installation support separately. Nothing is charged on this page; Buy now records the quoted price against your quotation.

Is this a certified safety or compliance system?

No. Genset Telematics is monitoring and record-keeping instrumentation, and it is not certified as a safety device or as a compliance system for standby power. It produces evidence a site can use in its own maintenance and compliance process. Whether a site's standby arrangement meets a particular standard remains a matter for that site's engineer and its authority.

How much does Genset Telematics cost, and what is included in the price?

Genset Telematics is quoted per site for the hardware and the scope described here. The first 3 years of service are included in the up-front project price; from year 4 the subscription is A$10 per site / month. The quotation is issued against the site assessment and states the delivery, invoicing and payment terms before anything is committed.

What hardware do I have to buy or install for Genset Telematics?

Genset Telematics ships as a kit: Genset Telematics ships as a telemetry node per generator with the sensor set needed for start, load, temperature and fuel, plus the record store and alarm path into the site's maintenance process. No S5-designed radio enclosure is required, because the site gateway is a finished product bought off the shelf. Installation is a guided self-install, and the site needs mains power or the supplied battery option at the gateway location.

How is Genset Telematics quoted, and what does the written quotation state?

Genset Telematics is quoted against a written commercial quotation. The quotation states the configuration, the price, the lead time and the freight for your site, and sets out the ordering, invoicing and delivery terms before anything is committed.

How do I get a price for my site, and what happens after I submit the form?

Use the “Get instant commercial quote” form on this page, which needs only your email address and your configuration choice. The store records the request against the genset-telematics subdomain and issues a quotation reference, so the enquiry is traceable rather than lost in a mailbox. You receive the quotation for the configuration and price shown; nothing is ordered and nothing is charged until you accept it, and the Request a quotation button is what records your interest.

What happens if Genset Telematics reports a failure or goes offline?

A Genset Telematics failure is recorded as evidence and handed to the operator, not silently retried. The record keeps the measured values, the time of the event and the limit that was crossed, and the response is a documented action by your team, not an automatic decision by the device. A missing reading is treated as a missing data point, not as a pass.

Book a free 30-minute consultation

Talk to an S5 engineer about whether Genset Telematics fits your site. Pick a time that suits you. The call is free and there is no obligation.

Open the booking page in a new tab

Talk to us

Questions on fit, price, setup or commissioning? A support engineer replies to every enquiry.

Product updates
ThemeCurrency